ENG
5
GC-5070
Operation Manual
8. CONNECTION AND INSTALLATION
•
Connect the USB receiver
m
to an available
USB port on the computer.
•
Download the software from the official site
from the product page and run the program
«SVEN Gamepad.exe».
•
In order to test and configure the gamepad,
choose «Control Panel» «Devices and Printers», in
the Windows control panel (in the «XInput» mode,
the gamepad is displayed as «Xbox 360 Controller
for Windows», in the «DirectInput» - «PC/PS3/
ANDROID»), then right-click on the device icon and
select. Gaming device parameters (administrator
rights may be required) (Fig.5,6). The «Game
devices» window will appear. In XInput mode,
the gamepad is displayed as «Controller (XBOX
360 For Windows)» (Fig. 7), in the «DirectInput»
mode - «USB Vibration Joystick (BM)» (Fig.8). To
switch between the «DirectInput» and «XInput»
modes, you must press the HOME button for the
6 seconds. In the «Direct-Input» mode, the mode
indicator will light pink (analog mode) or purple
(digital mode), and in the «X-Input» mode - blue.
•
To check and configure in «XInput» mode, select «Properties» in the «Game devices»
window, the «Properties: Controller (XBOX 36 ...» window will pop-up (Fig.9). In the
«Verification» tab, you can check the execution of commands when you press the buttons
and rotate the joystick. To calibrate the joystick, select the «Settings» tab, click «Calibrate»
and follow the instructions.
