ENG
6
PC Wired Gamepad
•
To check and configure in DirectInput mode, select
Properties in the Game Devices window, and the Properties:
USB Vibration Joystick (BM) window pops up. In the «Test»
tab, you can check the execution of commands when you
press the buttons and rotate the joysticks, and also check
whether the joystick is connected to the PC in the
«Connected State» line (Fig.10).
In the «Calibration» tab, you can center the position of both
joysticks (Fig. 10). To do this, you need to set them to the
middle position, then click «Default»
and
«
Set
». After
calibration, you must click «Accept»
or
«OK» on the bottom
line of this window to save the changes.
•
In the «Vibration Test» tab, you can check the operation of
both vibrators together by pressing the «Both force» button;
or separately, by pressing the «Left force»
and
«Right force»
buttons. And also by rotating the left joystick in the analog
mode of operation or by pressing the 8-way joystick in the
digital mode of operation (Fig. 11). To stop the test, press the
«Stop» button. Moving the cursor in the row «Vibration
strengthv» we can increase or decrease the force of vibration.
To save the settings, click «Apply»
or
«OK» in the bottom line
of this window.
•
The «About» tab provides information about the version of
the installed driver.
•
The device can work in analog and digital modes. The
modes are switch by pressing the HOME button.
•
With PS3.
Connect the gamepad to an available USB port. The system
will automatically establish a connection, and the LED
corresponding to the number of the gamepad in the system
will light up.
•
With Android.
To connect to devices running Android, you need a USB OTG
cable (not included). After connecting the gamepad with this
cable, the system will automatically establish a connection,
while the first LED will light up.
Fig. 9
Fig. 10
•
Connector for charging.
To switch between the «DirectInput»
and
«XInput» modes, you must press the HOME button for 6
seconds. In the «DirectInput» mode, the second left LED lights up, and in the «XInput» mode - the
3
rd
LED.
