ENG
3
User’s Manual
E-225B
DESCRIPTION
a
Volume up button (short press);
Next track (long press, ~ 2 seconds)
b
Micro USB jack for battery charging
c
LED indicator
d
ON/OFF button; Call control button; Рlay/Рause
e
Volume down button (short press);
Previous track (long press, ~ 2 seconds)
Fig. 1. Control
description
CONNECTION AND OPERATION
Attention! The built-in battery must be charged completely prior
to the headphones application.
Headset charging
•
Connect the headphones to a USB port of PC or USB charger
using USB/micro USB cable (included). During battery charging
the indicator
c
is red.
•
When the device is charged in full, the indicator
c
goes out.
•
There is a short periodic double beep signal when the battery
charge level is low and the LED indicator
c
will be red alternately.
•
The battery in the headphones is used as an integral part of the
device, therefore do not try to extract or replace it, because this
can result in the warranty cancellation or the device damage.
Device switching on/off
•
In order to turn on the headphones press and hold the button
d
before you hear a beep
signal. When the device is turned on, the LED indicator
c
will start blinking blue and
red
(search mode) or blinking blue (connecting mode). In order to turn off the device, press
once more and hold the button
d
before you hear a beep signal. When the device is turned
off, the LED indicator
c
will blink red.
Control buttons
When connected to a telephone:
•
in order to receive an incoming call press the button
d
; press the button
d
once again to
finish the call;
•
in order to reset the call, press and hold the button
d
(~2
seconds
)*;
a
b
c
d
e
+
-
