Bluetooth technology
•
Wireless data transfer via the Bluetooth protocol enables to connect wireless head-
phones to compatible devises. Maximum radius of action of data transfer is 10 m. Such
obstacles as walls or other electronic devices can interfere with the signal transfer.
Headset to a device interfacing
•
It is necessary first to interconnect the device with a signal source (see the connection
diagram in Fig. 2) to transfer signals via Bluetooth. To do this, turn on the headset, wait for
starting the search mode – the LED indicator
g
will alternate blue light with red one.
•
It is necessary to select the search mode of de vices with Bluetooth on a signal source
(telephone, notebook, smartphone, etc.). “SVEN AP-B530MV” massage will be displayed
on the screen, which is to be connected to*.
•
If connection is successful, there will be a short beep signal in the headphones; the
search mode indication on the headphones is over. If no devices is connected, head-
phones will turned off automatically in 2 minutes. If the device interfacing has, been failed,
it is necessary to switch the system in the search mode once more (turn off and on)**.
•
The indicator
g
on the headphones blinks blue short during the data exchange
(listening music) with a device connected via Bluetooth.
* You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second
search mode activation is not obligatory. Choose only the item name “SVEN AP-B530MV”
and the “connect” command on the source.
The use in the wired mode
•
The device can be used as stereo headphones in the wired mode. In order to connect
them to a sound source with the included cable via jack
e
.
Fig. 2. Connection diagram
Mobile device
PC
Headphones
ENG
4
Wireless Stereo Headphones
with Microphone
