ENG
4
Wireless Stereo Headphones
with Microphone
•
The indicator
c
on the headphones blinks blue short during the data
exchange with a device connected via Bluetooth.
* You might have to enter “0000” code to connect some models of devices via
Bluetooth.
** If the item has been already registered in the device list of a source, then the
second search mode activation is not obligatory. Choose only the item name
“SVEN AP-B350MV” and the “connect” command on the source.
Fig. 2. Connection diagram
Phone
PC
Headphones
•
If connection is successful, there will be a short beep signal in the head-
phones; the search mode indication on the headphones is over. If no devices
is connected, the search mode will be turned o
ff
automatically in three mi-
nutes and the headphones will go to the standby mode. If the device inter-
facing has been failed, it is necessary to switch the system in the search mode
once more (turn o
ff
and on)**.
The use in the wired mode
•
The device can be used as stereo headphones, if you connect them to
a sound source with the included cable to jack
e
. In this case it is not
necessary to turn on/o
ff
them. However, in this mode control elements and
the microphone on the cup will not be active.
