Sven 431, Operation Manual

Page: 14 / 16

5. PREPARATION AND OPERATION
MSS Connecting
SVEN 431 Multimedia USB Speaker System can be connected to virtually any audio source: a 3/
CD, PC sound card, etc. (see Fig. 2).
!
Before connecting, make sure that the MSS is unplugged. Insert the 3.5 mini-jack signal cable
built into the active speaker into the sound source audio output (see Fig. 2).
!
Set the master volume level to its minimum by turning the volume control knob
d
ounterclockwise
!
until it stops.
!
Plug the USB cable to the USB port of your PC or laptop, or to your 5V DC power supply.
!
Turn on your PC, switch on the device with the POWER | VOLUME switch
!
d
, the power LED
!
c
!
will illuminate.
!
Turn on your audio source. Adjust the master volume level with the volume control knob
!
d
. To
increase the volume, turn the knob clockwise; to reduce the volume, turn it counterclockwise.
!
Plug your headphones into the headphone jack
!
b
.
Bluetooth mode
In order to transmit signal in this mode it is necessary at rst to connect the device with a signal
source (see Fig. 2). To do this, select the Bluetooth mode: press the BLUETOOTH a button on the
MSS front panel. The indicator
c
!
will ash blue and red.
Passive
speaker
ctive
speaker
Fig. 2. Connection diagram
PC/DC=5V
Signal cable
Audio
cable
Mobile device
PC
ENG
14
2.0 USB Multimedia
Speaker System with Bluetooth