Sven 290, Operation Manual

Page: 14 / 16

5. PREPARATION AND OPERATION
Speaker placement
Place the speakers symmetrically to the listener at least one meter away.
Place MSS far away from monitors and TV sets, as insigni cant image distortion in these
supersensitive devices is possible.
MSS Connecting
SVEN 290 USB Multimedia Speaker System can be connected to virtually any audio source:
DVD/CD, PC sound card, etc. (see connection diagram, Fig. 2).
Before connecting, make sure that the MSS is unplugged. Insert the 3.5 mini-jack signal cable
built into the active speaker into the sound source audio output (see Fig. 2).
Set the master volume level to its minimum by turning the volume control knob
a
counterclock-
wise until it stops.
Plug the USB cable to the USB port of your PC or laptop, or your 5V DC power supply. Turn on
your audio source.
Adjust the master volume level with the volume control knob
a
. To increase the volume,
turn
the knob clockwise; to reduce the volume, turn it counterclockwise.
Notes. After using the MSS, mind to unplug it.
Fig. 2. Connection diagram
Passive
speaker
ctive
speaker
PC/DC=5V
Signal cable
Audio cable
ENG
14
2.0 USB Multimedia
Speaker System