Sven 120, Operation Manual

Page: 16 / 18

15
ENG
Operation Manual
SVEN 120
SVEN 150
SVEN 170
USB
Computer
mini-jack
Ø 3,5 mm
5. PREPARATION AND OPERATION
Speaker placement
!
Place the speakers symmetrically to the listener at least one meter away.
!
Place MSS far away from monitors and TV sets, as insigni cant image distortion in these
super-sensitive devices is possible.
MSS Connecting
Sven 120,
!
Sven 150, Sven 170
!
Multimedia Speaker Systems can be connected to virtually any audio
source:
!
DVD/CD, PC sound card, etc. (see connection diagram below).
!
Before connecting, make sure that MSS is unplugged. Connect signal cable mini-jack 3,5 mm
!
built-in speaker to audio output of the sound source, for example computer, as shown in the
diagram below.
Connect USB-connector to USB-port of PC (laptop or 5V DC power supply) via built-in USB-
cable.
Set volume level to minimum by turning /- control wheel on the cable counterclock-
wise until it stops.
Turn on PC power supply, turn on audio source.
!
Adjust volume level by turning /- control wheel.
Notes:
!
After nishing operation with MSS, mind to turn off the USB-cable from the PC, laptop USB
port or 5V DC power supply.
!
To enhance sound quality, use Line-Out output of soundcard.
Connection diagram
/-
control