5
On the following pages of this brochure you will find a few installation suggestions and instructions on how to assemble these.
2
1
3
4
6
How to assemble your Unit shelf
This i
s how
the a
ssem
bly
temp
late l
ooks
like.
Unit consists of two differ-
ent kinds of shelves, right
shelves and left shelves.
RIGHT
R
LEFT
L
• Start by checking that you have the assembly template, the back plates and the shelves.
• You need the following tools to assemble the Unit shelf:
drill / screwdriver and screws suitable for your wall type.
• Lay out the assembly template on the floor and plan how you want to assemble your shelf.
Mark where the back plates should be placed on the template with a pencil.
NOTE
that the
assembly template and the back plates should have the
arrow pointing upwards
.
• Attach the template on the wall with the
arrows facing upwards
and make sure it is levelled.
• Pre-drill the wall according to the template where the back plates will sit.
• Remove the assembly template from the wall.
• Screw the back plates with the
arrows facing upwards
on the wall.
• Start assembling your shelf from the bottom upwards by hooking the four metal pulleys,
which are attached on the back of the shelf, into the back plate.
NOTE
that each shelf can be
rotated in four different positions.
• Assemble bookends if desired.
