SVAT VIS300-7M2 Instruction Manual Download Page 4

     

                                                                        

SVAT ELECTRONICS

now  you  can  see  

PLEASE READ BEFORE INSTALLING 

• 

When cleaning, use a DRY, lint-free cloth. Unplug the camera, monitor and AC/DC adapters before 

 

cleaning. NEVER immerse any components in water and do not spray cleaners or solvents on the units.

 

 Doing so may damage the units or cause electrical shock. 

• 

Locate the camera, monitor and AC/DC adapters where there is adequate ventilation. Do not locate the  

 

camera in direct sunlight. 

• 

Do not locate the camera, monitor and AC/DC adapters near heat sources such as heat registers, radiators,  

 

ovens, furnaces or other appliances with high operating temperatures.

• 

Do not use the camera near water or damp and wet environments, such as a bathtub, laundry tub,  

 

kitchen sink, or wet basement. 

• 

Do not use with extension cords. Use only the AC/DC adapters provided with this system.

 

 ***Note: Use of other adapters may damage the units and void your warranty. 

• 

Keep the camera, monitor and AC/DC adapter cords out of reach of children. 

• 

Only plug components into standard household voltage outlets (110VAC, or 60Hz). 

• 

Do not place cords from the AC/DC adapters, camera or monitor where they can be pinched or stepped  

 

on. Protect the cords by keeping them out of the way of children, pets and routine household traffic. 

• 

Do not place heavy objects on power cords or cover cords with rugs or carpet. 

• 

Unplug the AC/DC adapters from the wall outlet when the system is not in use for extended periods of  

 

more than a week; vacations etc... 

• 

Mishandling, alterations or modifications not approved by the manufacturer will void the warranty. 

THINGS TO CONSIDER BEFORE INSTALLATION 

• 

Do not place the intercom system near strong magnetic fields, such as televisions and video recorders. 

• 

Do not place the video intercom system in direct sunlight. 

• 

Do not disassemble this device freely; there are high voltage flows inside the system that can cause  

 

bodily harm. 

CAUTION! 

 

Do not paint over the camera.

• 

  Connect this unit ONLY to other compatible units. Do not connect it to any other type of alarm or auxiliary  

  device. Connecting anything else to this unit may damage it or prevent it from operating properly.

• 

  If connecting device to a doorstrike please make sure it has a 8-16 VAC power supply, or it will not be  

  compatible with this device 

VENTILATION 

Slots and openings in the monitor and the back or bottom are provided for ventilation and to ensure reliable

operation of the video monitor or equipment and to protect if from overheating. These openings must not be 

blocked or covered. The openings should never be blocked by placing the video monitor on a bed, sofa, rug, or 

other similar surface. Video monitor should never be placed near or over a radiator or heat register. Video monitor 

should not be Placed in a built-in installation such as a bookcase unless proper ventilation is provided. 

IMPORTANT SAFETY PRECAUTIONS 

3

Summary of Contents for VIS300-7M2



















Reviews: