ISC301
9
INSTALLING BATTERIES
1. Open the battery compartment located on the
bottom of the camera (A).
2. Insert 3 AA batteries (not included) ensuring the
polarities (+ and -) are correctly lined up with the
markings inside the battery compartment.
3. Replace the battery cover.
THINGS TO CONSIDER BEFORE INSTALLATION
• Place the camera in the most strategic place where it can be seen by every visitor. Having the
camera in the open for people to see can help to deter criminals
• We recommend using the included screws, hardware and drilling template for all installations
Note:
Before mounting the imitation camera, you should fi rst install the batteries
following the instructions below.
INSTALLATION
A
TURNING THE FLASHING LED ON
1. Once the batteries have been installed, following the instructions above, the red LED will
begin to fl ash (2 second intervals). Removing the batteries turns off the LED.
