16
and the main device have been setup to the same channel. If you
have 2 wireless IR cameras, one should select channel 1 & 3 or 2 & 4
to obtain the optimum result.
b.
Prevent obstructions (caused by wall or steel) between the main
device and the camera during transmission.
c.
Due to wireless network access point and wireless IR camera
having the same 2.4GHz frequency. Therefore, please prevent
operating the wireless IR camera under wireless networking
environment.
Q: May one use other branded wireless IR cameras?
A: Please adjust the channel of the main device, check whether
normal video images are displayed and furthermore apply audio
testing. It is recommended that the GX5400 system only be used with
a GX540 camera because the channel frequencies are identical.
Q: May one switch channels to monitor multiple wireless IR cameras?
A: Yes, please refer to [IR Camera-Back View] for wireless IR camera
channel setup.
Q: Why is there no audio?
A: Please make sure that the monitor is properly connected to the
correct camera input and the volume is turned up.
Q: Why are video images constantly changing color?
A: It is because according to the CCD camera, different illuminants
reflects different degrees of color rolling; please keep the camera
away from direct lighting.
Q: How can the wireless IR function on the camera be started?
A: IR function is auto started during the night time (low illumination).
The CDS sensor recognizes low light and will automatically turn on
the LEDs.
Q: Why is the video black & white when the IR function is activated?
A: It is because under low lux video, images turn from color to black
and white.
C CF Card
Q: Why can't the device read the CF card?
A:
a.
The CF card is damaged.
b.
The CF card system format is incompatible to the device.
Please format the CF card to the FAT16 file system.
Q: May one use the CF card from their digital camera?
A: Yes, only if it is FAT16 format.
Q: Are there any limitations on CF card brand?
A: No, any standard brand may be used. CF cards are universal.
D Record
Q: Why are the video images distorted?
A: Make sure that the monitor’s video source is setup properly
(i.e., main device is setup to PAL and camera to NTSC).
Q: Why is the recording quality poor?
A: Please adjust your recording parameter; adjust your quality to high.
Q: Why is the device unable to record?
A:
a.
Check the input system.
b.
Check whether the CF card have been inserted (to view the
monitoring status, please refer to the bottom right screen corner, CF
GX5400: 2.4GHz Wireless Digital Video Recording System