4-4-7: PASSWORD SETUP
The password consists of 1 to 8 digits. Click the 0 ~ 9 to enter the password.
Then click ENTER to confirm the password and enter the system.
1. USER ID
- Displays User ID.
2. USER PW
- Enter the current password.
3. NEW PW
- Enter the new password.
4. CONFIRM PW
- Enter the new password again for confirmation.
Note:
Always write down your password and keep it in a safe location. If you lose your
password, contact SVAT Electronics for support.
4-4-8: BUZZER SETUP
1. KEY TONE
- Turns the beeps on or off while
operating the DVR.
2. VIDEO LOSS
- Turns the alarm on or off at the
video loss.
4-5: EXTERNAL DEVICE
1. TCP/IP SETUP
- Sets up the DVR’s TCP/IP
configuration (for network use).
2. SPOT SETUP
- SPOT video output setup.
SVAT ELECTRONICS
now you can see
CLEARVU1
22
1. We strongly recommend that you change the following settings as soon as you
power on the DVR:
(A) Set up the time/date.
(B) Go to the HDD management and FORMAT HDD. This will clear the video you
recorded after power on and avoid any time/date discrepancies.
2. DO NOT change the date and time after the recording starts. It may corrupt the
DVR’s data archive and cause playback errors. If it is necessary to change date and
time after the recording starts, please repeat step 1 to avoid errors.