13
29 Water input interface
30 input power supply
terminal 3 ~ 380
Manual welding
use "hand contact arc/argon arc/high frequency argon arc" function on hand position, located in the
"hand arc welding", namely into manual electric arc welding mode.The adjustment knob is to adjust the
welding current, welding current 25A to 400 A.
Also has hot arc adjustment knob and thrust adjustment knob function to improve the welding arc and
droplet transition process.
DC argon arc welding
use "hand contact arc/argon arc/high frequency argon arc" function in contact or high frequency
argon arc, namely into argon arc welding mode;Then the pulse/dc mode on dc mode, namely into dc
argon arc welding mode, the adjustable knobs as below:
Adjust the welding current adjustment knob to adjust welding current, 20 ~ 500 a.
Adjustment pre aeration time adjustment knob to adjust pre aeration time, 0.3 ~ 10 s.
Adjustment arc starting current adjustment knob to adjust the arc current, 20 ~ 500 a.
Adjustment rise time adjustment knob to adjust welding current rise time, 0 ~ 10 s.
Adjustment fall time adjustment knob to adjust welding current fall time, 0 ~ 10 s.
Adjustment crater arc current adjustment knob to adjust crater arc current, 20 ~ 500 a.
Adjustment lag expired adjustment knob adjust lag time expired, 0.5 ~ 25 s;
DC pulsed argon arc welding
use "hand contact arc/argon arc/high frequency argon arc" function in contact or high frequency
argon arc, namely into argon arc welding mode;Then pulse/dc mode in the pulse mode, namely into
pulse argon arc welding mode, the adjustable knobs as below:
Adjustment pre aeration time adjustment knob to adjust pre aeration time, 0.3 ~ 10 s.
Adjust the welding current adjustment knob to adjust pulse welding current, 20 ~ 500 a.
Adjustment base value current adjustment knob to adjust base value pulse current, 20 ~ 500 a.
Summary of Contents for PROTIG -PIII Series
Page 19: ...17 SPARE PARTS LIST ...
Page 24: ...22 ...
