Suzuki SZTV-40LED6A, Service Manual

Page: 29 / 32

22
CHAPTER 8: FIRMWARE UPDATE
9-1
：
USB Update:
1,
First update to the USB into the software inside
，
Then insert the TV
，
Red and green LED lights flash and other end
，
Successful software update, If update fails,piease use
11-1
means
9-2
：
PC Update:
2 .The USB ISP to connect to the PC's USB tool port, install the driver
2.1.
Card upgrade, the USB ISP tools through 4pin wire, connected to the board CN18 blue port, such as
The figure below shows
2.2 Machine upgrade, the USB ISP tools through 4pin wire, connected to the VGA upgrade the board, then connect
To the machine's VGA port, as shown below