Air Bag System: 8B-109
Passenger Air Bag (Inflator) Module Removal
and Installation
S4RS0A8206007
WARNING:
• Never attempt to disassemble or repair the
passenger air bag (inflator) module. If any
abnormality is found, be sure to replace it
with new one as an assembly.
• Be sure to read “Precautions on Service
and Diagnosis of Air Bag System: ”,
“Precautions on Handling and Storage of
Air Bag System Components: ” and
“Precautions on Disposal of Air Bag and
Seat Belt Pretensioner: ” before starting to
work and observe every precaution during
work. Neglecting them may result in
personal injury or undeployment of the air
bag when necessary.
Removal
1) Disable air bag system. Refer to “Disabling Air Bag
2) Disconnect passenger air bag (inflator) module
connector (1) as shown in figure.
a) Unlock lock button (2).
b) With lock button unlocked, disconnect connector.
3) Remove passenger air bag (inflator) module
attaching bolts (1).
4) Remove passenger air bag (inflator) module with air
bag hole cover (1) from instrument panel as shown.
5) Remove passenger air bag (inflator) module (1) from
air bag hole cover (2).
WARNING:
• When carrying a live air bag (inflator)
module, make sure the bag opening is
pointed away from you.
Never carry air bag (inflator) module by
wires or connector on the side of the
module. In case of an accidental
deployment, the bag will then deploy with
minimal chance of injury.
• As the live passenger air bag (inflator)
module must be kept with its bag (trim
cover) facing up while being stored or left
standing, place it on the workbench with a
slit facing down or use the workbench vise
to hold it securely at its lower mounting
bracket. This is necessary so that a free
space is provided to allow the air bag to
expand in the unlikely event of accidental
deployment.
• Observe “Precautions on Handling and
Storage of Air Bag System Components: ”
for handling and storing it.
Otherwise, personal injury may result.
2
1
a)
b)
I4RS0A820060-
1
I4RS0A820061-
“
A
”
“
A
”
“
A
”
1
I4RS0A820062-
1
2
I4RS0A820063-
Summary of Contents for SWIFT RS415 2017
