Suzuki SWIFT RS415 2017, Service Manual

Page: 848 / 1257

7B-23 Air Conditioning System:
Installation
Reverse the removal procedure to install condenser
noting the following instructions.
• Replenish specified amount of compressor oil to
compressor suction side referring to “Replenishing
Compressor Oil” in “Operation Procedure for
Refrigerant Charge: ”.
• Evacuate and charge the A/C system referring to
“Evacuation” and “Charge” in “Operation Procedure
for Refrigerant Charge: ”.
Desiccant Removal and Installation
S4RS0A7206009
Removal
1) Remove condenser assembly referring to
“Condenser Assembly Removal and Installation: ”.
2) Remove cap (1) from receiver/dryer tank.
3) Remove desiccant (2) from receiver/dryer tank.
Installation
Reverse the removal procedure noting the following
instructions.
• Replenish specified amount of compressor oil to
compressor suction side referring to in “Operation
Procedure for Refrigerant Charge: ”.
• Do not remove desiccant from the plastic bag until just
before inserting it into the receiver.
• Install the desiccant with its welded part downward.
• Apply compressor oil to cap’s O-ring.
• Tighten cap to the specified torque
Tightening torque
Cap (a): 3.0 N·m (0.3 kg-m, 2.5 lb-ft)
• Evacuate and charge the A/C system referring to
“Evacuation” and “Charge” in “Operation Procedure
for Refrigerant Charge: ”.
2
1
I4RS0A720019-
(a)
I4RS0A720020-