Suzuki SWIFT RS415 2017, Service Manual

Page: 40 / 1257

0B-11 Maintenance and Lubrication:
Automatic Transaxle Fluid Level Inspection
S4RS0A0206039
1) Inspect transaxle case for evidence of fluid leakage.
Repair leaky point, if any.
2) Make sure that vehicle is placed level for fluid level
check.
3) Pull out dipstick and check fluid level.
For fluid level checking procedure, refer to “A/T Fluid
Level Check: in Section 5A” and be sure to perform
it under specified conditions.
If fluid level is low, replenish specified fluid.
Automatic Transaxle Fluid Replacement
S4RS0A0206040
1) Inspect transaxle case for evidence of fluid leakage.
Repair leaky point, if any.
2) Make sure that vehicle is placed level for fluid level
check.
3) Change fluid. For its procedure, refer to “A/T Fluid
Change: in Section 5A”.
Automatic Transaxle Fluid Cooler Hose
Inspection
S4RS0A0206041
Check automatic transaxle fluid cooler hose for fluid
leakage, cracks, damage and deterioration.
Replace hose and/or clamp if any faulty condition is
found.
All Latches, Hinges and Locks Inspection
S4RS0A0206035
Doors
Check that each door of front, rear and back doors
opens and closes smoothly and locks securely when
closed.
If any malfunction is found, lubricate hinge and latch or
repair door lock system.
Engine Hood
Check that secondary latch operates properly (check
that secondary latch keeps hood from opening all the
way even when pulling hood release handle inside
vehicle.) Also check that hood opens and closes
smoothly and properly and hood locks securely when
closed.
If any malfunction is found, lubricate hinge and latch, or
repair hood lock system.
1. Dipstick 3. FULL HOT mark
2. Clamp 4. LOW HOT mark
1. Drain plug
I4RS0A020016-
I4RS0A020017-
I4RS0A020020-
I3RB0A010004-
I2RH01020033-