Suzuki RM-Z450, Manual

Page: 88 / 121

6-29
Major Adjustment
1. Loosen the lock nut
2
. Turn
adjuster bolt
3
so the clutch
lever clearance
A
measured
at the lever holder obtains 2 –
3 mm (0.08 – 0.12 in) when
squeezing the lever until pres-
sure is felt.
2. Tighten the lock nut
2
to the
specified torque.

Cable adjuster lock nut:
2.1 N·m (0.21 kgf-m, 1.55 lbf-ft)
DRIVE CHAIN
This motorcycle has a continuous
drive chain constructed from spe-
cial materials. It does not use a
master link. We recommend that
you take your motorcycle to an
authorized Suzuki dealer if the
drive chain needs to be replaced.
The condition and adjustment of
the drive chain should be checked
before each use of the motorcy-
cle. Always follow the guidelines
below for inspecting and servicing
the chain.

WARNING
Riding with the chain in poor
condition or improperly
adjusted can lead to an acci-
dent.
Inspect, adjust, and maintain
the chain properly before each
ride, according to the instruc-
tions in this section.

WARNING
Servicing the machine with
engine running can be hazard-
ous. You can be caught in the
moving parts such as the drive
chain, sprockets etc.
Be sure to stop the engine
when servicing the machine.