Suzuki RA410, Manual

Page: 363 / 761

6) Connect negative cable at battery.
With engine “OFF” and ignition switch “ON”, check for fuel
leaks.
FUEL PUMP ASSEMBLY (WITH FUEL
FILTER, FUEL LEVEL GAUGE AND FUEL
CUT VALVE)
REMOVAL
1) Remove fuel tank from vehicle. Refer to FUEL TANK RE-
MOVAL in this section.
2) Disconnect fuel breather hose (1), fuel vapor hose (2) and pipes
from fuel pump assembly.
When disconnecting joint of fuel feed line (3) or return line (4)
from pipe, unlock joint by inserting special tool between pipe
and joint lock first.
Special Tool
(A): 09919-47020
WARNING:
Refer to the WARNING at the beginning of ON-VEHICLE
SERVICE in this section.
(A)
4
2
1
3) Remove fuel pump assembly (1) from fuel tank.
INSPECTION
Check fuel pump assembly for damage.
Check fuel suction filter (1) for evidence of dirt and contamination.
If present, replace or clean and check for presence of dirt in fuel
tank.
For inspection of fuel pump itself, refer to Section 6E of this manual.
For inspection of fuel level gauge (2), refer to Section 8B of this
manual.
1
2
ENGINE FUEL 6C-9