Suzuki qc-1, Owner'S Manual, Page: 16 / 52

16
STRUMPLATE
EFFECTS
To hear only the Strumplate voice press the EZ Play button
and then press the Auto Chord button twice.
Only the Chord Hold and Manual Chord LED’s in the Chord Mode
section should now be on.
1
VIBRATO STRUMPLATE EFFECT
The next two pages discuss the on board Strumplate effects:
Vibrato & Reverb. Both of these effects have depth control so
that you can select how much of the effect you would like to add
to your Strumplate voice.
The Vibrato effect causes an oscillating or “wavy” sound to the
strumplate voice.
2 Press VIBRATO button.
The Vibrato LED should now be on.
When you engage the Vibrato effect the LED light bar in the
Strumplate Voice section will light for two seconds to indicate
the amount or depth of the Vibrato effect that is engaged.
Press the Chord Mode Volume Control after you select the
Vibrato button.
You have 2 seconds after engaging the Vibrato effect to adjust
the depth.
After that the Chord Mode Volume control will adjust the overall
Accompaniment Chord Mode Volume.
Try different depth settings with different Strumplate voices to get
a feel for the impact of this interesting and impressive effect on
the strumplate sounds.
3
Strum the Strumplate to hear the Vibrato effect.
Strum the Strumplate once with the Vibrato effect engaged and
once with the Vibrato effect off.
Listen to the difference, if you want to increase or decrease the
amount of Vibrato continue on to Step 4.
4
ADJUSTING THE DEPTH OF THE VIBRATO EFFECT