Suzuki Liana RH413, Service Manual

Page: 1216 / 1302

9F-3 Security and Locks:
Power Door Lock System Operation Inspection
S3RH0A9604002
1) Check the following operation:
a) When the driver side key cylinder is turned LOCK once, check all doors lock.
b) When the driver side door key cylinder is turned UNLOCK twice, check all doors unlock.
If malfunction is found, go to “Power Door Lock System Circuit Inspection”.
Power Door Lock System Circuit Inspection
S3RH0A9604003
1) Disconnect negative (–) cable at battery.
2) Disconnect door lock controller coupler “L82” (1).
3) Confirm that all doors are unlocked. Connect battery positive (+) and negative (–) terminals to door lock controller
coupler terminals, and check door lock and unlock operation as follows.
If it does not operate as specified, repair applicable circuit or check actuator. If it operates as specified, go to next
step.
Power door lock operation for vehicle with dead lock system
9 10 11 12 13 14 15 16 17 18
1 2 3 4
5 6 7 8
9 10 11
12 13 14 15
16 17 18
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16 17 18
1 2 3 4 5 6 7 8
1
1
1
[A]
[B]
[C]
1
2
3
TERMINAL
L82-3 L82-2 L82-1 L82-10
OPERATION
UNLOCK LOCK
LOCK DEAD LOCK
DEAD LOCK UNLOCK
Step
I3RH0A960002-01
[A]: Step 1: Lock operation check
[B]: Step 2: Dead lock operation check
[C]: Step 3: Unlock operation check