25
TIRE PRESSURE
Using an accurate air gauge, check the air pressure of
the front and rear tires.
The pressure should be as shown.
COLD INFLATION TIRE PRESSURE
HEADLIGHT BEAM ADJUSTMENT
The headlight beam can be adjusted both horizontally
and vertically if necessary.
To adjust the beam vertically:
Turn the adjuster
A
clockwise or counterclockwise.
To adjust the beam horizontally:
Turn the adjuster
B
clockwise or counterclockwise.
ENGINE OIL
Check the engine oil level through the engine oil
inspection window with the motorcycle held vertically
on level ground.
1. Start the engine and allow it to run for a few minutes
at idling speed.
2. Turn off the engine and wait about three minutes,
then check the oil level through the inspection win-
dow.
3. If the level is below the “L” mark, add oil to “F” level.
If the level is above the “F” mark, drain oil to “F”
level.
4. Reinstall the drain plug and engine oil filler plug.
Tighten them securely.
"
Oil drain plug: 23 N·m (2.3 kgf-m)
A: Engine oil filler plug
B: Engine oil level inspection window
SOLO RIDING
DUAL RIDING
FRONT
250 kPa
2.50 kgf/cm
2
36 psi
250 kPa
2.50 kgf/cm
2
36 psi
REAR
250 kPa
2.50 kgf/cm
2
36 psi
250 kPa
2.50 kgf/cm
2
36 psi
This motorcycle is shipped from factory with
the engine filled with engine oil.
Be sure to check oil level.
