Suzuki 2009 Grand Vitara, Owner'S Manual

Page: 207 / 309

5-56
OTHER CONTROLS AND EQUIPMENT
79K20-03E
Using HomeLink
®
To operate, simply press and release the
programmed HomeLink
®
button. Activation
will now occur for the trained device (i.e.
garage door opener, gate operator, secu-
rity system, entry door lock, home/office
lighting, etc.). For convenience, the hand-
held transmitter of the device may also be
used at any time. In the event that there
are still programming difficulties or ques-
tions, contact HomeLink
®
at
www.homelink.com or 1-800-355-3515.
Erasing HomeLink
®
Buttons
To erase programming from the three but-
tons (individual buttons cannot be erased
but can be “reprogrammed” as outlined
below), follow the step noted:
Press and hold the two outer HomeLink
®
buttons until the indicator light begins to
flash-after 20 seconds. Release both but-
tons. Do not hold for longer that 30 sec-
onds. HomeLink
®
is now in the train (or
learning) mode and can be programmed at
any time beginning with “Programming
HomeLink
®
” – step 2).
Reprogramming a Single
HomeLink
®
Button
To program a device to HomeLink
®
using a
HomeLink
®
button previously trained, fol-
low these steps:
1) Press and hold the desired HomeLink
®
button. DO NOT release the button.
2) The indicator light will begin to flash
after 20 seconds. Without releasing the
HomeLink
®
button, proceed with “Pro-
gramming HomeLink
®
” – step 2).
For questions or comments, contact
HomeLink
®
at www.homelink.com or 1-
800-355-3515.
Frame Hooks
Front
78K052
Rear
64J123
(1)