PERIODIC MAINTENANCE 2-13
ENGINE OIL AND OIL FILTER
ENGINE OIL REPLACEMENT
• Keep the motorcycle upright.
• Place an oil pan below the engine, and drain oil by removing
the oil drain plug
1
and filler cap
2
.
• Tighten the drain plug
1
to the specified torque, and pour
fresh oil through the oil filler. The engine will hold about 3.2 L
of oil. Use of API SF/SG or SH/SJ with JASO MA.
Oil drain plug: 23 N·m (2.3 kgf-m)
• Start up the engine and allow it to run for several minutes at
idling speed.
• Turn off the engine and wait about three minutes, then check
the oil level through the inspection window. If the level is
below lower line
B
, add oil to full line
A
. If the level is above
full line, drain oil to full line.
A
: Full line
B
: Lower line
(ENGINE OIL)
Replace initially at 1 000 km (2 months) and every
6 000 km (12 months) thereafter.
(OIL FILTER)
Replace initially at 1 000 km (2 months) and every
18 000 km (36 months) thereafter.