SV1000K3 23
IN FUEL PUMP + FUEL PRESSURE REGURATOR
FI-SENSORS
ITEM
SPECIFICATION
NOTE
Injector resistance
11 – 13
Ω
at 20 °C (68 °F)
Fuel pump discharge amount
168 ml and more (5.7/5.9 US/lmp oz)
for 10 seconds at 300 kPa (3.0 kgf/cm
2
, 43 psi)
Fuel pressure regulator operat-
ing set pressure
Approx. 300 kPa (3.0 kgf/cm
2
, 43 psi)
ITEM
SPECIFICATION
NOTE
CMP sensor peak voltage
3.7 V and more
CKP sensor resistance
130 – 240
Ω
CKP sensor peak voltage
5.0 V and more (When cranking)
IAP sensor input voltage
4.5 – 5.5 V
IAP sensor output voltage
Approx. 2.5 V at idle speed
TP sensor input voltage
4.5 – 5.5 V
TP sensor resistance
Closed
Approx. 1.12 k
Ω
Opened
Approx. 4.26 k
Ω
TP sensor output voltage
Closed
Approx. 1.12 V
Opened
Approx. 4.26 V
ECT sensor input voltage
4.5 – 5.5 V
ECT sensor resistance
Approx. 2.45 k
Ω
at 20 °C (68 °F)
IAT sensor input voltage
4.5 – 5.5 V
IAT sensor resistance
Approx 2.45 k
Ω
at 20 °C (68 °F)
AP sensor input voltage
4.5 – 5.5 V
AP sensor output voltage
Approx. 4.0 V at 100 kPa (760 mmHg)
TO sensor resistance
19.1 – 19.7 k
Ω
TO sensor voltage
1.4 V and less
GP switch voltage
0.6 V and more (From 1st to top)
Injector voltage
Battery voltage
Ignition coil primary peak volt-
age
200 V and more (When cranking)
STP sensor input voltage
4.5 – 5.5 V
STP sensor resistance
Closed
Approx. 0.58 k
Ω
Opened
Approx. 4.38 k
Ω
STP sensor output voltage
Closed
Approx. 0.58 V at input voltage is 5.0 V
Opened
Approx. 4.38 V at input voltage is 5.0 V
STV actuator resistance
7 – 14
Ω
Heated oxygen sensor output
voltage
0.4 V and less at idle speed
E-02, 19
0.6 V and more at 3 000 r/min
E-02, 19
Heated oxygen sensor resis-
tance
4 – 5
Ω
at 23 °C (73.4 °F)
E-02, 19
PAIR solenoid valve resistance
20 – 24
Ω
at 20 °C (68 °F)