background image

 

Page 3 of 10 

 

1.  Introduction 

 
Congratulations with the purchase of your monitor. This LCD monitor is a color active matrix thin-film-
transistor (TFT) liquid crystal (LCD) to provide superior display performance. 

 

2.  Safety 

 
This monitor is only suitable for use in an interior 

environment where it’s not sealed and not subject to 

dust, dirt, condensation (Pollution Degree 2) (IP20). 
 
It is not allowed to connect appliances to the monitor which does not comply to SELV or Class II 
qualification. 
 
Unplug the monitor from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or 
isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed 
air. To clean the monitor, use a cloth lightly damped with a mild detergent. 
 
The slots located on the backside of the monitor case are for ventilation. Do not block or insert 
anything inside the ventilation slots. 
 
It is important that your monitor remains dry. Do not pour liquid into or onto the monitor. If the monitor 
becomes wet do not attempt to repair it yourself. 
 
If the liquid crystal materials leaks from the panel, it should be kept away from the eyes or mouth. In 
case of contact with hands, legs or clothes, it must be washed away thoroughly with soap. 
 

Warning: This is a class A product. In a domestic environment this product may cause radio 
interference in which case the user may be required to take adequate measures. 
 

3.  Model descriptions 

 

Part number 

Description 

Included cable(s) 

150TFT2411 

Monitor 24” 

VGA 

150TFTG2411 

Monitor 24” with 4mm tempered glass 

VGA 

150TFTG2411J 

Monitor 24” with 4mm tempered glass 

DVI 

150TFTS2411M 

Monitor 24” with 3M touch screen serial 

VGA + Serial 

150TFTS2411MU 

Monitor 24” with 3M touch screen USB 

VGA + USB 

150TFTS2411MUJ 

Monitor 24” with 3M touch screen USB 

DVI + USB 

 
Further models to be announced. 

4.  Monitor connection 

 

1.  Connect the 12V power supply to the monitor. 
2.  Connect one end of the video cable to the computer and the other to the monitor. Tighten by 

turning the two thumb screws clockwise to ensure proper grounding. 

3.  Connect one end of either the touch screen cable to the computer and the other end to the 

monitor. 

4.  Press the power button on the rear panel to turn the monitor power on. 

 

 

Summary of Contents for VISIONPRO 150TFT 2411 Series











Reviews: