12
SECTION 3: OPERATION
System Operation
Bill Recognition
Sensors detect when a bill is inserted into the
acceptor. These signal the transport motor to
activate to pull the bill into the bill acceptor.
Bill Validation
From the time the transport motor begins to run
until the trailing edge of the bill passes over them,
the bill validation sensors scan the bill. This
information is forwarded to the microprocessor to
determine the validity of the bill.
Bill Stacking and Credit
If the bill is determined to be authentic, it is trans-
ported to the stack position. Once the bill is in
the stacking position, the stacker motor runs and
credit is given.
Bill Rejection
If the bill is determined to be invalid, the wrong
denomination, or if some cheating method is
sensed, the bill transport motor will reverse to
return the bill to the customer.
Smart Bezel™
The Smart Bezel option is used to communicate
in real time, the bill acceptors real-time
acceptance of US $5 bills ($10 bills for Canada)
to the customer. Under the default condition, the
$1 & $5 light ($5 & $10 for Canada) will show
acceptance of $5 bills as long as there is enough
change in the changer to make change for the
$5. See Figure 9.
Anti-Stringing / Anti-Fishing
Sensors detect when objects are inserted into the
bill validator. If something is inserted and it is not
seen as a bill, it will be rejected. If something is
still seen in the path after a valid bill is
transported and stacked, the stacker plate will
extend as a means of keeping the valid bill from
being withdrawn. With Level 3 Security, the rest
position of the bill stacker pushplate completely
blocks access to the bill path. Once a valid bill is
inserted, the pushplate withdraws and the bill is
pulled in. Level 3 Security provides an additional
Figure 9
level of security aganst stringing and fi shing
attempts.
Water Removal Cycling Feature
Vantage employs a patented water removal
cycling technique. When certain sensors are
blocked prior to a valid bill being inserted, the
bill will then be cycled back-and-forth to wick off
the water in the bill path. After the bill is quickly
cycled several times, the bill is pulled in for
validation and the system returns to normal
operation.
Smart
Smart
Bezel
Bezel
•
Is Lit When
:
Both bills
accepted and change made for either.
•
•
Is Lit When
:
Change can only
be made for $1 bills.
Communicates to Customer Which
Bills Are Accepted
Feature not available on all m odels.
Note: For correct operation, make sure $1 and $5
bills are enabled (see Configuration Settings).
™
Denotes acceptance of both $1 and $5 bills
Smart
Smart
Bezel
Bezel
•
Is Lit When
:
Both bills
accepted and change made for either.
•
•
Is Lit When
:
Change can only
be made for $1 bills.
Communicates to Customer Which
Bills Are Accepted
Feature not available on all m odels.
Note: For correct operation, make sure $1 and $5
bills are enabled (see Configuration Settings).
™
Denotes acceptance of both $1 and $5 bills
Summary of Contents for Coinco Vantage Series
