Suzohapp ARPEGE SECURITY SC-350, Technical Handbook

Page: 48 / 114

Set-up
Technical Handbook 019722-101 Rev. 05
38
SC-350/360
7.15 Summary
Note! MS is the mains power switch.
Text shown on display
Keys Function
B Shows the number of coins counted since the last
batch stop.
B+C Resets the number of coins counted since the last
batch stop.
C Resets the number of coins counted.
C+MS Switching the automatic reversing on and off.
ACC Shows the number of coins stored in the memory.
ACC+C Resets the memory.
M Adds the number of coins shown on the display to
the memory.
Q Shows selected batch stop. When pressed repeatedly;
choice of batch stop size.
Q+M…C Setting of a temporary batch stop.
Q+MS Reprogramming of the pre-set batch stops.
Q+B+MS Setting of the service interval.
Q+ACC+MS Statistics mode.
Q+ACC+C+MS Configuration of password.
Q+M+MS Additional set-up.
Start/Stop Starts or stops the machine, or leaving the set-up or
other configurations.
Start/Stop+
Q+M+B+MS Master reset.
Text Explanation
15.
009456
Example of alternating numbers on the display. The
decimal point after 15 means millions and means that 15
should be put together with the other number, 15009456.
1. 250´ Example of the setting of the first batch stop which is
250,000.
5. 2500 Example of the setting of the fifth batch stop which is
2,500.
888888 Display test.
CALL For
SErvicE The machine has reached the service limit.
Coin Number of coins counted, statistics register.
ConFIr Confirmation of previously entered password.
FAIL The wrong password has been entered.