Set-up
Technical Handbook
019722-101 Rev. 05
35
SC-350/360
8 - Disabling service interval
To disable the service interval, set the interval to zero,
see
“Service Intervals” on page 32
.
If the service interval is set to 100 (demonstration mode), you must
change one of the digits in the service interval and then change it
back to zero.
9 - Exiting the service interval menu
a) Press and hold
Start/Stop
.
b) When the machine returns to the normal operating mode, release
Start/Stop
.
c) If a password is set, the display will show “P. - - -”. Enter the
password to continue.
– If the password is correct, the display will show “SEr x”.
– If incorrect, the machine will return to normal operating
mode.
7.13 Entering Password
a) Enter the password by pressing
ACC
,
B
and
C
.
b) Press and hold
Start/Stop
after entering the password.
– If the password was entered correctly the display shows
“PASS”.
– If the password was entered incorrectly the display shows
“FAIL”.
c) Release
Start/Stop
.
