Suunto n6HR, Instruction Manual

Page: 24 / 64

24
11.Press and hold NEXT/STOP for 2 seconds to reset the chronograph.
3.6.2. Timer-Chrono
This is a combined countdown timer and chronograph. You can set a countdown time,
and when it reaches zero, you will hear a beeping sound, and then the chronograph is
activated.
1. Enter the Chrono mode.
2. Press ENTER to access the chronograph sub-menu.
3. Select
Timer Intervals.
4. Select Timer-Chrono.
5. Set the desired countdown time (seconds and minutes) with PREVIOUS or NEXT/
STOP, and accept the selections with ENTER. The message ‘
TIMER
-
CHRONO
INTERVAL SET
’ is displayed, and you return to the chronograph display.
6. Press ENTER to access the chronograph sub-menu.
7. Select
Timer.
8. Select Timer-Chrono . The message ‘
TIMER
-
CHRONO ACTIVATED
’ is displayed, and
you return to the chronograph display.
9. Use PREVIOUS to toggle between the chronograph, timer and current time.
10.Press START/LAP/LIGHT to start the countdown. When the countdown reaches
zero, the chronograph starts counting up.
11.Press START/LAP/LIGHT to store splits.
12.Press NEXT/STOP to stop the chronograph.
13.Press NEXT/STOP to view your individual splits.
14.Press and hold NEXT/STOP for 2 seconds to reset the chronograph.