18
Timer-Chrono
This is a combination countdown timer and chronograph. You can set a countdown
time, and when it reaches zero, this will activate the chronograph.
1. Enter the Chrono mode.
2. Press ENTER to access the chronograph sub-menu.
3. Select
Timer Intervals.
4. Select
Timer-Chrono.
5. Set the desired countdown time (seconds and minutes) with PREVIOUS or NEXT/
STOP and accept the selections with ENTER. The message ‘
TIMER
-
CHRONO
INTERVAL
SET
’ is displayed and you return to the chronograph display.
6. Press ENTER to access the chronograph sub-menu.
7. Select
Timer.
8. Select
Timer-Chrono
. The message ‘
TIMER
-
CHRONO
ACTIVATED
’ is displayed and
you return to the chronograph display.
9. Use PREVIOUS to toggle between your selected countdown time and 0.00,0.
10.Press START/LAP/LIGHT to start the countdown. When the countdown reaches
zero, the chronograph starts counting up.
11.Press START/LAP/LIGHT to store splits.
12.Press NEXT/STOP to stop the chronograph.
13.Press NEXT/STOP to view your individual splits.
14.Press and hold NEXT/STOP for 2 seconds to reset the chronograph.
