3.20. Tones
Device tones can be turned on or off. When tones are off, there are no audible alarms.
To set tones:
1. While in time mode, keep [DOWN] pressed.
2. Press [DOWN] or [UP] to scroll to Tones and press [SELECT] .
3. Press [DOWN] or [UP] to toggle on/off and confirm with [SELECT] .
4. Press [MODE] to exit.
3.21. Water contact
The water contact is located on the side of the case. When submerged, the water contact
poles are connected by the conductivity of the water. Suunto D6M switches to dive state
when water is detected and the depth gauge senses water pressure at 1.2 m (4 ft).
The AC is shown until the water contact deactivates. It is important to keep the water contact
area clean. Contamination or dirt can prevent automatic activation/deactivation.
NOTE: Moisture build-up around the water contact may cause the dive mode to
activate. This can happen, for example, when washing your hands or sweating. To save
battery power, deactivate the water contact by cleaning it and/or drying it with a soft towel.
Suunto D6M
23