Suttle H5EA User Manual Download Page 3

1

INTRODUCTION

    The H5EA

 

HDMI Extender over Single Cat

5e

 boosts up your video/audio transmission distance up 

to 60m (200ft) in HDTV 1080i format, 40m (130ft) in HDTV 1080p format, and 20m (65ft) in HDTV 1080p 
with 36 bit color depth. With only one cost effective Cat5e cable, users can readily extend HDTV sources 
from DVD players, Blu-ray Disc player, PS3, PC, and any other kinds of sources compliant with TMDS 
to distant display monitors including HDMI/DVI enabled TV sets or LCD PC monitors. With the state-of-
the-art Silicon Image chipsets equipped, deep color video, DTS-HD or Dolby TrueHD audio, and HDCP 
supports and compatibility are all further insured. This flexibility makes HDCP compliant DVD players 
or PS3 transmit utmost high quality video and audio with a greater distance at the minimal cost, when 

integrating several components apart.

    The 

H5EA

 includes two units: an HDMI transmitting unit and an HDMI receiving unit. The 

transmitting unit is used to capture the input HDMI/DVI signals and carry the signals through one RJ45 
connector into one cost effective Cat-5/5e/6 cable. The receiving unit is responsible for equalizing the 
transmitted HDMI signal. The transmission distance between the sending and receiving units can be up 
to 60m (200ft) under HD (720p/1080i) or 40m (130ft) under Full HD (1080p). With an 8-level equalization 
rotary control on the receiving unit, users can adjust the equalization strength to the received HDMI 

signals accordingly, and therefore optimize the transmission distance between source and destination.

FEATURES

●  State-of-the-art Silicon Image (founder of HDMI) chipset embedded for utmost compatibility and 

reliability

●  HDMI 1.3c compliant

●  HDCP 1.1 compliant

●  Extends the transmission distance up to 60m (200ft) from the sources under 1080i or 720p

●  Extends the transmission distance up to 40m (130ft) from the sources under 1080p

●  Provides independent DDC channel, fully HDCP compliant

●  Minimizes the cable skew by adjustable 8-level equalization rotary control switch

●  Pure unaltered uncompressed 7.1ch digital HDMI over UTP cable transmission

●  Allows cascading 

●  Wall mounting housing design for easy and robust installation

●  Perfectly integrated with other HDMI over CAT5e series products

i

The claimed transmission distance here is subject to the grade of installed cable(s), source 
device and display. 

For CAT5/COAX transmission, the cable(s) has to be solid, not stranded. Any

 jacks

  

along the transmission path may reduce the transmission performance significantly! 

Summary of Contents for H5EA











Reviews: