4.10 20141208
(
)
1
1.
GENERAL INFORMATION
1.1
Introduction
1.2
About This Manual
The XenoWorks Micromanipulator is a manipulator system comprised of three basic parts:
the controller (BRM), manipulator mechanical (MP-285/M), and joystick.
In the next, few pages you will find a product description to help you become acquainted with
operation, followed by installation instructions, and then detailed operating instructions.
Please take the time to read these instructions to assure the safe and proper use of this
instrument.
This manual is continually being updated. If you encounter any areas you feel should be
covered in expanded detail we would like to hear from you. Please contact our Technical
Support staff with your suggestions (415-883-0128 or [email protected]).
1.3
Technical Support
Unlimited technical support is provided by Sutter Instrument Company at no charge to our
customers. Our technical support staff is available between the hours of 8:00 AM and 5:00
PM (Pacific Time) at (415) 883-0128. You may also E-mail your queries to
.
1.4
Product Description
NOTE: Unless otherwise noted, all references to the manipulator mechanical are for the
right-handed version.
1.4.1
Packing List
The XenoWorks™ Micromanipulator is shipped with the following components:
1.
Manipulator mechanical
2.
Controller
3.
Joystick
4.
Manipulator mechanical base plate
5.
Mains power cord
6.
Cable for connecting the manipulator mechanical with the controller
7.
Cable for connecting joystick with the controller
8.
Instruction manual
9.
Manipulator mechanical mounting screws (4)
10.
Hex key (for manipulator mechanical mounting screws)
If any items are missing or appear damaged, contact Sutter Instrument or your dealer/rep
immediately.
XENOWORKS MICROMANIPULATOR SYSTEM (TOUCHDECLUTCH) OPERATION MANUAL – REV.
