Sutron P Line, User Manual

Page: 38 / 102

Installation and Commissioning P Line Touch Panel
38
2.4.1.2.2 Date and Time
You set up date, time and time zone via the Date and Time menu item.
2.4.1.2.3 Administration
The Administration menu shows device information.
Information The following informations are displayed:
–
Device type
– Hardware version,
– Serial number,
– Image name,
– Image date,
– Operating system.
2.4.1.2.4 Network
You can configure the network settings with the Network menu item.
IP Address Use Dynamic IP (DHCP)
The network configuration is automatically obtained from the DHCP server.
Confirm your selection with the green check.
Use Static IP
Manually assign an ip address, subnet mask and gateway of the operating de-
vice.
Confirm your selection with the green check.
WINS / DNS Optionally, enter the addresses for the WINS / DNS server.
Confirm your selection with the green check.
Device Name You can define a device name with a maximum of 15 characters. Via network, the
device can be accessed with the device name instead of the ip address.
Confirm your selection with the green check.
SNTP Enter the address of an intranet or internet time server. Define an interval in mil-
liseconds for time synchronization.
Confirm your selection with the green check.
The input fields are only active when you set up a static ip.