mr
.
steam
®
Installation, Operation & Maintenance Instructions
_____________________________________________________________________________________________
INSTALLER:
___________________________________________________
READ THIS ENTIRE INSTRUCTION MANUAL THOROUGHLY
BEFORE BEGINNING INSTALLATION. LEAVE THESE INSTRUC-
TIONS WITH HOMEOWNER.
• BE CERTAIN ELECTRICITY IS SHUT OFF AT MAIN PANEL
BEFORE ATTEMPTING TO WIRE OR SERVICE THE TOWEL
WARMER. Follow instructions to make certain the Towel
Warmer is properly mounted and secured to the wall. FAILURE
TO FOLLOW THESE STEPS COULD RESULT IN HAZARDOUS
CONDITIONS INCLUDING ELECTROCUTION.
• DO NOT alter or modify any Mr. Steam products. Doing so
may result in an inoperable or hazardous installation and will
void the warranty.
1. Install in accordance
with National and
local codes.
2. Do not locate in show-
er stall, tub or near
water spray.
3. Do not locate within
the shower or tub
zone. See illustration.
4. All models are to be protected by dedicated and suitably
rated GFCI circuit breaker or equal.
TO ENSURE CORRECT OPERATION OF YOUR TOWEL WARMER,
PLEASE FOLLOW ALL INSTRUCTIONS CAREFULLY, OBSERVING
THE "CAUTION" and “WARNING” NOTATIONS FOR EACH STEP.
Inspect Towel Warmer
Unpack the Towel Warmer carefully to avoid any damage or loss
of any part. When opening the box be sure that the parts are not
accidentally discarded. Towel Warmers are shipped in specially
designed shipping cartons. The entire surface of the Towel
Warmer is hand-wrapped to protect the finish. It is your responsi-
bility to immediately inspect for any damage.
3
TOWEL WARMER SPECIFICATIONS
_____________________________________________________________
Model #
Dimensions (inches)
Amps
Volts/Phase Weight (lbs.)
W x H x D
_____________________________________________________________
W328
20 x 31
3
⁄
8
x 4
3
⁄
4
0.82
120/1
10
F328
19
7
⁄
8
x 34
3
⁄
8
x 11
3
⁄
4
0.82
120/1
10
W336
20 x 38
7
⁄
8
x 4
3
⁄
4
1.11
120/1
14
HOMEOWNER:
______________________________________________________
THANK YOU for selecting MrSteam Towel Warmer, the perfect
addition to bathrooms, family spas, and exercise rooms within
your home. Our products have been a standard for quality and
comfort, and we are sure that you will experience continued
enjoyment from the Towel Warmer you have purchased by fol-
lowing these instructions.
TOWEL WARMERS ARE HOT! The Towel
Warmer is an electrical heating appliance, intended only for
indoor residential applications and, as such, should be
installed and used with certain precautions for your safety.
1. INSTALLATION PROCEDURES FOR WALL-MOUNTED
UNITS MUST BE ACCOMPLISHED BY QUALIFIED PERSON-
NEL IN STRICT ACCORD WITH APPLICABLE NATIONAL
AND LOCAL BUILDING AND ELECTRICAL CODES.
2. DO NOT place TOWEL WARMER units inside a shower,
sauna or steam room enclosure or any other wet location or
with elevated temperature because the towel warmer may
be an electrocution hazard.
3. CAUTION is advised when a Towel Warmer is accessible to
children because the towel warmer is hot.
4. A dedicated wall switch or timer should be used to control
the TOWEL WARMER unit. Contact MrSteam for an in-wall
24-hour-7 day timer (PN W-103588DIG) Note: All switches
and control devices must be installed on the load (black)
side of the Towel Warmer circuit in compliance with the
National Electrical Code (NEC) and local code. (see page 6
for installation instructions)
IMPORTANT:
The finish of your Towel Warmer can be pro-
tected and maintained by an occasional wiping with a soft,
non-abrasive, damp cloth and lightly polished, thereafter, with
a soft dry cloth when the Towel Warmer is cold. Under no cir-
cumstances should abrasive cleaning powders, metal polish or
chlorine-based cleaners be used on any part of this product.
IMPORTANT:
This appliance is for warming towels only.
DO NOT use this appliance to dry wet towels.
IMPORTANT:
This appliance is intended for towels washed in
water. Fabrics that contain soap or detergent residue may
show what appears to be scorch marks. However this may be
the discoloration of the residue. MrSteam is not responsible
for discoloring or damage of any fabrics. Refer to the MrSteam
towel warmer warranty for additional terms and conditions.
For illustrative purposes only
Shower/Tub
Zone
Do not locate the
towel warmer within
the shower/tub zone
This picture shows the recommended
method of draping a towel on a towel
warmer. Ensure as much as possible of
the towel's surface is touching the
towel warmer for optimum towel
warming.
NOTE:
Dimensions are approximate
NOTE:
Hard wired and cord connected models have the same
dimensions, amps and weight. Cord connected models include an
integral 6 foot power cord.
WARNING
!
WARNING
!
WARNING
!
