Date: November 2016
Issue No: 2
Crewsaver -
Servicing Manual : Offshore 290 Lifejacket
Page
of 35
30
8
Section
Fig 8.3 Repacking the Offshore 290N
Following inspection of the lifejacket. Lay the deflated
jacket out on a flat dry surface.
Ensure Inflation mechanisms, cylinders and light are fitted.
Ensure zipper is ready and sitting at the left side of the zip
(As worn)
1
A
. Ensure dust caps are fitted to Oral tubes.
B
. Secure lifting beckets with red poppered retainers on
inner edge of inflation chamber
C
. Secure light Water activated switch with Light retainer
velcro located on the webbing at the back of the
inflation chamber.
D
. Secure Light cord under the hood velcro retainer.
(underneath the spray hood velcro tab)
A.
Gather spray hood up with the center velcro retainers
and secure.
B
. Ensure velcro tabs have been secured.
C.
Insert folded (x3) safety line webbing into elasticated
safety line pouch on the inner right cover. (As worn) Attach
both hooks to the front D ring.
2
Fold lower left edge of chamber up over the tie in point.
A
B
3
A
B
C
D
Manual head
on back
Auto head
on Front
Zipper
End
Light
C
