Survision Micropak 3, Installation & Settings Manual

Page: 6 / 31

Where cameras are installed before being connected to the power supply and the
computing network, it is essential that the connectors be protected against water entry.
Installation location rules for maximum performance:
6
• Installation of the camera on the same side as the terminal stand,
• On a curved lane, place the camera to the outside of the curve,
• Where the supporting fixture allows it, the lack of horizontality caused by the angles should
be reduced to a minimum,
• The camera view of the vehicle should not be totally or partially concealed by any
environmental element (barrier bar or column, advertising sign, etc…),
• There should be no vehicle or pedestrian passing between the camera and the vehicle
being filmed.
Installation location rules to ensure maximum performance:
See table on page 5 for minimum and maximum distance.
Th e minimum distance of 3.5m/11.48 ft allows the plate to remain in the image when the
vehicle has come to a stop so that performance is not degraded by other vehicles trying to
pass quickly through behind it.
1.3 - Specific installation rules for car-parks and for normal toll installation
when reading from the front