35042AD
21
SETUP
The Setup menu includes System Settings, Picture Setup, and Streaming
Settings.
Note
The Setup menu displays limited setup options. For a complete list of
setup options, see the
Advanced
section.
SYSTEM SETTING
Camera Name
Host Name
– The Host Name is used to identify the camera on your
system. If camera based Motion Detection is enabled and is set to send
alarm message by Mail/FTP, the host name entered here will display in
the alarm message.
Time Zone
– Select your time zone.
Time Format –
Select your desired time format.
Sync With Computer Time
– Select to synchronize the camera date and
time with the connected recorder.
Sync with NTP Server
– Manual allows you to define the date and time
manually. Network Time Protocol (NTP) is an alternate way to
synchronize your camera’s clock with a NTP server. Specify the server
you wish to synchronize in the
NTP Server
box. Then select an
Update
Interval
. For more information about NTP, visit
www.ntp.org
.
IP ADDRESS
You can choose to use a fixed IP address or a
dynamic IP address (assigned by a DHCP server
or router) for the camera.
Get IP an Address Automatically (DHCP)
The camera comes preconfigured with a fixed IP
address, selecting
Get IP address automatically
requires a router or DHCP server to assign an
IP address to the camera.
Note
Every network device has a unique Media Access Control (MAC) address
that can be used for identification. The MAC address is located on
the bottom of each camera, and on the box label (Toshiba Device
