QUICK START GUIDE
EHV Digital Video Recorder
POWER BUTTON
Live
Open Shutdown/Reboot screen.
FUNCTION BUTTONS
SETUP
Open the system setup menu.
SEARCH
Open the Search Menu.
31035AB Rev B
03/12
LOGGING IN FOR THE FIRST TIME
DVR
User ID: admin
Password: <none>
DIRECTIONAL BUTTONS
PTZ
Move the camera view point up.
PTZ
Move the camera view point to the right.
Search
Play recorded videos. When pressed successively, the
search jumps forward in time by 30 minute increments.
Search/Pause
Step forward one frame.
PTZ
Move the camera view point to the left.
Search
Play recorded videos in reverse. When pressed successively,
the search jumps back in time by 30 minute increments.
Search/Pause
Step backward one frame.
PTZ
Move the camera view point up.
DISPLAY
Change the display mode. Display switches in the following order
when the DISPLAY key is pressed successively: (Single > 4
>
9 >
16 > PiP).
BACKUP
Opens the Export menu.
SEQ
Starts the Sequence function.
REPLAY
Starts playing last recorded video (10sec from current time).
ENTER BUTTON
Setup
Input data, and make selections.
DISPLAY
SEQ
You can easily archive video while watching a video playback.
In the search mode:
1.
Press the BACKUP button on the front panel to set the Start time. You will see PRESS
BACKUP BUTTON TO SET END TIME at the top of the playback monitor.
2.
Continue video playback until you reach the end of the desired clip.
3.
Press the BACKUP button again to set the end time.
4.
In the backup menu window, select the backup media (USB thumb drive), and start the
backup.
QUICK BACKUP IN SEARCH MODE
When starting the EHV for the first time, the MySurveillix window will open first. To enable My-
Surveillix on your recorder during the initial configuration:
1.
Click ENABLE MYSURVEILLIX NOW.
2.
Log in using the default admin user account. (username: admin, password: <blank>)
3.
Set the DAILY UPDATE TIME.
4.
Click SEND to send a test report to MySurveillix.
5.
Click SAVE to save your settings.
If you did not enable MySurveillix during the initial system configuration, you can choose to en-
able it at any time. To enable MySurveillix on your recorder after the initial configuration:
1.
Click SETUP and log in with the Admin user.
2.
Go to NETWORK > MYSURVEILLIX SETUP.
3.
Set ENABLE MYSURVEILLIX to ON.
4.
Set the DAILY UPDATE TIME.
5.
Click SEND to send a test report to MySurveillix.
6.
Click SAVE to save your settings.
ENABLE MySurveillix CLOUD MONITORING
