23
E N G L I S H
1) Input Terminals
2) LCD Display
3) Functional Buttons
4) Rotary Switch
5) Trigger: press the lever to open the
transformer jaws. When the pressure on the
lever is released, the jaws will close.
6) Hand Guards: to protect user’s hand from
touching the dangerous area.
7) Transformer Jaws: designed to pick up the
AC current flowing through the conductor.
It could transfer current to voltage.
Figure 1
THE METER STRUCTURE
(Figure 1)
ROTARY SWITCH
Below table indicated for information about the rotary
switch positions.
Power is turned off.
AC / DC voltage measurement.
Diode test.
Continuity test.
Resistance measurement.
AC current measurement range from 0.001 A
to 400 A
Rotary Switch
positions
Function
FUNCTIONAL BUTTONS
Below table indicated for information about the
functional button operations.
• Press
HOLD
to enter and exit the Hold mode in any
mode, the Meter beeps.
• Press and hold
HOLD
button while turning on the
Meter to display full icons.
• Press
MAX
to start recording and updating of maximum
values.
• Press
SELECT
button to switch between and
.
Button Operation Performed
