00ZX418369E-01
11/16
6-1
Connecting Procedures
①
Before connecting the connector, make sure that the
pressure in tube is not pressurized.
②
Pull the socket sleeve by hand.
(See Fig. 1 and photo.)
③
Insert the socket into the plug by pulling the socket sleeve
until the head of socket reaches the plug.
(See Fig. 2 and photo.)
・
Whenever connecting the socket, pull the sleeve by hand. Pulling
sleeve allows socket connection.
・
Apply operating fluid or pure water to the O-Ring of the socket
(inner) or O-Ring sliding part of the plug (sealing part) when
connecting the socket or plug to prevent the O-Ring from being
damaged and to reduce the slide resistance (insertion load).
●
Release pressure from the piping before attaching the connector.
A pressurized condition may cause spouting of chemicals,
resulting in personal injury.
●
Connect the tube without any moment or tension to bend the joint
portion.
DANGER
This is Mandatory Rule!!