Surgical Company Axess Vision Broncoflex M User Manual Download Page 5

 

Accessories 

Follow  best  practice  in  endoscopy  and  professional  standards  for  use  of  accessories.  If  a  specific  or  very 
specialised accessory is available from another manufacturer, please contact Axess Vision Technology to test its 
compatibility before using it with the endoscope. 

 

The effective length of an endoscope accessory must exceed that of the effective length of the endoscope by at 
least around 30cm. 

 

Substances used 

The  operating  channel  of  the  Broncoflex  is  compatible  with  the  substances  normally  used  during  a 
bronchoscopic examination (physiological water, mucous membrane lubricants, standard light anaesthetics used 
for this type of procedure, etc.). 

2.  P

RECAUTIONS IN USE

 

 

Check  the  packaging  is  not  damaged  before  use.  Any  device  whose  packaging  is  damaged  must  not  be 
used, and must never be resterilised. 

 

Check  each  Broncoflex  before  use,  looking  for  any  damage.  If  the  product  is  damaged,  do  not  use  the 
device. 

 

The product must be handled and used with extreme care by qualified personnel. 

 

Check the clamp on the handle and the Up/Down articulation lever are operating correctly. 

 

Check the operating channel plug is in place. 

 

Clean the lens with an optical wipe if necessary. 

 

Comply strictly with the rules about asepsis when handling the product. 

 

If there  are  any  problems  inserting  the  product  into  the  bronchi  or  into  a  probe,  do  not force  it,  and  try  to 
ascertain the cause before continuing. 

 

Carefully select the correct size of the intubation probe for each patient. 

 

The compatibility of the Broncoflex with all non-powered accessories must be checked before each use. 

 

Do not use the device while administering a highly-flammable anaesthetic gas to the patient. 

 

Do not use the device during defibrillation. 

 

It is strictly forbidden to use: 

o

  powered endotherapy accessories with the bronchoscope, 

o

  active endoscopic accessories (such as laser probes or electro-surgical equipment). 

 

Handle cutting or piercing tools with care, in order not to damage the flexible tube of the endoscope. 

 

Provide a similar, back-up system so that the procedure can continue in the event of a malfunction. 

 

The Broncoflex is discarded after use into the container for single-use contaminated items. 

 

Do not exceed a suction pressure of 400 mmHg (533 mbar) 

 

Summary of Contents for Axess Vision Broncoflex M













Reviews: