22
1.
Ignition Switch:
This switch controls the elec-
tric power to the engine.
2.
Throttle:
The throttle is preset and locked to
run at optimum RPM and is not adjustable.
Engine RPM directly affects output from the
alternator, and therefore the RPM should
never be adjusted.
3.
Choke:
This push/pull ring (GC160) slide
lever (GX160 &270) controls the position
of the choke. Close the choke for starting
when the engine is cold. Open the choke
as the engine warms. Always fully open
the choke when operating the machine.
4.
Starting Rope:
Pull sharply on the start-
ing rope T bar when starting the engine.
Release the T bar when engine is running.
5.
Fuel Shut-Off Valve:
(EX17, GX160
& GX270 only) This valve controls the
flow of fuel to the engine. Turn the
valve on when running the engine and
off when refuelling or not in use.
4.5.1 ENGINE CONTROLS
Always read the engine operator's manual supplied with the machine to familiarize yourself with its oper-
ating and starting procedure details.
4.5 CONTROLS
Please review this section to familiarize yourself with the location and function of each control before
starting. The controls of the SurgeMaster generators are laid out so that they are easy to see and use.
Familiarizing yourself with the controls will enable you to take advantage of all the features available on
the SurgeMaster generators and apply them as conditions demand.
Fuel
Tank
Fuel
Shut-off
Choke
Starting
Rope
On / Off
Fuel
Tank
Starting
Rope
Choke
On / Off
Fuel
Shut-off
Choke
Starting
Rope
Fuel
Tank
On / Off
Fuel
Shut-off
Choke
Starting
Rope
Fuel
Tank
SM2500CH - GC160
SM3000CH & SM3000GFI - GX160
SM5000CH & SM5000GFI - GX270
SM3000SU - EX170
