9
Manual 19“ Basic Unit
19“ Basic Unit Manual | Surface Concept GmbH
4 Device Layout & Operation
4.1 Device Layout
The layout of the 19” Basic Unit is given below.
1. Power switch, to turn ON/OFF the device
(lighted, when switched ON)
2. Hardware reset button
3. Status LEDs for Power (lightens up when
device is switched on) and Ethernet
connection (lightens up only when a software
is connected to the HV supply).
4. Touch Display
5. Control knob for high voltage adjustment
6. Control knob for channel selection
7. BNC connector for hardware interlock
(output of BNC connector must be grounded
to deactivate interlock)
8. Ground connector for device grounding
9. Ethernet socket
10. Power socket
1
2
3
4
5
6
7
8
9
10
Figure 1: Layout of the 19” Basic Unit R015.
