7
What the LED Colours Mean:
NOTE:
For troubleshooting procedures, please refer to
Rectifying Power Faults
and
Rectifying Fence Faults
on page 9.
POWER
LED
GREEN
Normal operation. The internal battery has plenty of power.
RED
Internal battery is low. Check solar panel is clean and setup correctly.
RED FLASHING
Critically low battery.
Rectify immediately!
BLUE
Displayed while using the advanced option setting switch.
FENCE
LED
GREEN
Normal operation. The Pingg-String Wire is active.
RED
Pingg-String fence wire has low power.
RED FLASHING
Pingg-String fence wire has very low power.
Rectify immediately!
BLUE
You have selected the ON/OFF Timer. The fence is currently inactive.
BLUE FLASHING
Only happens when switched ON. Energiser is analysing the fence voltage.
NOT LIT
Power LED flashes RED: Device is in Standby (no output)
Advanced User Features
The cog icon on the solar panel is a
touch switch (similar to some mobile
phones). The touch switch is activated
for up to 45 seconds whenever the
Energiser is switched ON. During this
time, you can customise the operation
of the Energiser.
How to Use the Touch Switch
1.
Touch the cog icon for about 1 second until you see both LED lights glow BLUE.
TIPS:
Touch lightly, don’t press hard.
If your finger is small, use your thumb.
2.
As soon as you see both LEDs glow BLUE, remove your finger off the cog.
3.
Wait a moment until the BLUE LEDs switch OFF.
4.
Momentarily touch & release the cog icon. The number of times you touch and
release the cog determines the function you select, as per the meanings on page 8.
TIP:
Y
ou’ll find the switch responds
better when you press and release by moving
your finger at least 2cm away from the cog.
Summary of Contents for Pingg-String
Page 2: ...2...
