GET THE BEST FROM THE BEST
Your SureFire illumination tool has been designed and manufactured
to provide years of reliable service. Please review this manual to
ensure optimal performance.
LOCKOUT TAILCAP
(US PAT. RE40125)
Most SureFire illumination tools feature a lockout tailcap, which prevents
accidental activation during storage or transport. The tailcap may
need to be enabled prior to light operation.
To enable, rotate tailcap clockwise until it stops turning. Press pushbutton
to activate light.
To lock out tailcap, rotate counterclockwise until light will not
activate when pressed.
LIGHT OPERATION
Press or click pushbutton tailcap switch once for low output. Return
to off and press or click on again, within two seconds, for high output.
BATTERY REPLACEMENT
Most SureFire illumination tools ship preloaded with
batteries. To load or replace batteries:
1. Unscrew tailcap counterclockwise and remove.
2. Remove old batteries and dispose of properly.
3. Insert new 123A lithium batteries with positive (+) terminals oriented
forward.
4. Replace tailcap by screwing on clockwise. Press pushbutton (with
tailcap enabled) to test.
Note: Never mix old and new batteries; always replace all batteries at same time.
G2X-MV
BATTERY INFORMATION & WARNINGS
For complete battery information and warnings, reference the enclosed
BATTERY INFORMATION / WARNING insert in your illumination tool’s
original packaging or visit www.surefire.com/batteries.
MAINTENANCE
Wipe with a clean, dry cloth. For tips on maintaining your SureFire
illumination tool, visit www.surefire.com/faqs-maintenance.
ACCESSORIES
SureFire makes a full line of accessories for most of its illumination tools.
For a complete listing, visit www.surefire.com/partsaccessories.
ENABLE
DISABLE
PRESS
OR CLICK
TO ACTIVATE
1.100
4.87
4.71
1.00
