FCC Warning
This equipment can generate, use and radiate radio frequency energy and, if
not installed and used in accordance with the instructions in this manual, may
cause interference to radio communications. This equipment has been tested
and found to comply with the FCC rules, which are designed to provide
reasonable protection against radio interference when operated in a
commercial environment. Operation of this equipment in a residential area is
likely to cause interference, in which case the user, at his own expense, will
be required to take whatever measures are necessary to correct the
interference.
CE Declaration of conformity
This equipment complies with the requirements relating to electromagnetic
compatibility, EN 55022 Class A for ITE, and EN 50082-1. This meets the
essential protection requirements of the European Council Directive 89/336/
EEC on the approximation of the laws of the Member States relating to
electromagnetic compatibility.
Trademarks
All company, brand, and product names are trademarks or registered
trademarks of their respective companies.
A. Converter to 100BASE-FX Device Connection
Step 1.
Connect one (ST- or SC-type) end or a fiber cable to
either ST or SC connector on the converter and the end
of the fiber cable to the ST or SC connector on the other
converter or 100BASE-FX )device.
5
6
B. Converter to 100BASE-TX Device Connection
Step 1.
The maximum length for straight through twisted pair
cable (Category 5) between 100BASE-TX device (Hub
or Switch) and the converter is 100 meters.
Step 2.
Connect one end of twisted pair cable to the RJ-45 jack
on the converter and the other end of twisted pair cable
to the RJ-45 jack on the 100BASE-TX device.
T h e 100 M R J-45 to F ib er C o nv erter
T h e 100 B ASE -T X D evic e
(H u b or Sw itch )
The RJ-45 Cable
T he 10 0 M R J-4 5 to F ib er
C o nv e rter
T he 10 0 M R J-4 5 to Fib er C o n ve rte r
o r 10 0B A S E -F X D ev ice
The Fiber Cable
Tx
Rx
Tx
Rx
7
Converter Installation
Standard: IEEE 802.3u 100BASE-TX and 100BASE-FX
Access Method
: CSMA/CD
Maximum Distance
: Twisted Pair --- 100m (330ft)
Fiber Optic --- 2000m (6600ft)
Connectors
: 1 ST Fiber Optic (SC-type
optional) and 1 RJ-45 port
Approvals
: FCC , CE Mark
Power Supply
: External Power, 5V DC, 2.5A
Temperature
: Operating 0 oC ~ 50 oC
Storage -10 oC ~ 70 oC
Humidity
: Operating 10% ~ 80%
Storage 5% ~ 90%
Dimension
: 105x 60x 23mm. (L x M x H)
Specifications
Full-Duplex Mode
This converter works as full-duplex mode only if those
connected switches are configurable and manageable as
fixed speed of 100Mbps and full-duplex mode.
Therefore, if you want to operate this converter as full-
duplex mode, you need to connect to the switches config-
ured at full-duplex mode.
v
If the Full/Half LED of the connected switch does not
indicate as full-duplex mode, that means it is working
at half-duplex mode now.
