SureCall | 48346 Milmont Dirve, Fremont CA 94538 | 1-888-365-6283 | [email protected]
7
Installing Your Hardware
Installing Your Hardware
Connect the Data Port: Connect USB connector (not provided) to the supplied
SC-174 6 foot cable and connect the cable to the booster connection labeled
INSIDE.
Connect the Power Cord:
To prevent damage to the booster, before plugging in the booster to an AC
power outlet, make sure the booster’s power switch is in the OFF position.
Then connect the AC power cord to the booster using the USB connector end.
Then connect the free plug to the outlet. Make sure all of the connections to the
booster are tight and secure. The LED light will turn green indicating that the
booster is ready to use.
Using the Booster
The booster is ready for use as soon as all connections are made and the unit
powers up without the red light coming on. You may now enjoy enhanced
cellular reception through your laptop or computer.
Optional 1-
Outside Omni
Optional 2 -
Outside Yagi
FlexPro
Note:
Due to the recent change of our company name from Cellphone-Mate (CM) to SureCall (SC) we have changed the prefix
on all of our antennas, cables and accessories from CM to SC-.
Note:
The booster case may become warm during operation. This is normal. Press any key on your cell phone to refresh
communication with the base station.
